7
USE
the #5 Allen key to tighten the four (4)
screws that hold the top support arms to the base, and
the four (4) set screws on each of the crossbars.
7
TIGHTEN REMAINING SCREWS
FOR THIS STEP
USING
two (2) 5mm x 20mm machine
screws, attach the power supply to the table top.
There are pre-drilled holes for you to align.
8
INSTALL POWER SUPPLY
FOR THIS STEP
these four (4) set screws
on the crossbar are the
same ones from step 5
these four (4) screws on
the arms are the same
ones from step 4
2x
