15
USER INSTRUCTIONS
MAKE
sure there is nothing blocking the travel of the desk in the space where it will operate. After the desk is
assembled and plugged into the power outlet, the controller will need to be initialized. To do so, press and hold
the “Down” button until the desk descends completely, then “bounces” and ascends slightly. Doing so allows the
control unit to register the lowest elevation before use.
STORING A HEIGHT PRESET
ADJUSTING TO A SAVED POSITION
ADJUST THE DESKTOP TO THE POSITION YOU WANT TO SAVE.
THE DISPLAY WILL SHOW THE DESKTOP HEIGHT.
PRESS THE MEMORY KEY.
THE DISPLAY WILL READ S -.
PRESS THE DESIRED MEMORY POSITION KEY (E.G. 1).
THE DISPLAY WILL READ S 1. THE SET DESKTOP POSITION WILL NOW BE
SAVED TO THE SELECTED MEMORY POSITION KEY.
YOU WILL HEAR AN AUDIBLE DOUBLE CLICK AND AFTER ABOUT 2 SECONDS
THE SAVED DESKTOP POSITION WILL BE DISPLAYED.
PRESS the desired memory position key (e.g. 2) and hold it down. The
desktop will move until it reaches the saved position. If you release the key
before the saved position is reached, the desktop will stop and the saved
desktop position will not
be reached.
