iMotion SW111, Руководство пользователя

Страница: 25 / 313

iWaylink Inc.
25
Chapter 3: BLE Mode
User can configure different BLE connection mode in different Bluetooth
environment.
1.
HID Mode(Third party Bluetooth devices with USB HID mode)
2.
BLE Dongle(Original factory dongle, USB-HID / USB-COM configurable)
3-1 LED indication
Mode indication:
Description
Red When something gets wrong, the red LED will be on.
Green Under Cable mode, the green LED indicator will be flash per 3
seconds.
Good Read Indicator indicates whether the barcode is successfully
decoded. Green LED shows a successful decoding attempt.
Blue Under BLE mode and BLE is not connected, the blue LED
indicator will be flash per 3 seconds.
When power on and BLE is connected, the blue LED will be on.
Power indication:
Description
White White LED shows the power status information.
1. When connect cable for battery recharge, the LED will change
from off to on and then to off, repeat the cycle until battery power is
full then become constantly on.
2. While it is not under battery recharge status, this LED will be off.
3. While under BLE mode, this white LED will indicate different
status as below:
(1).When battery is low, the white LED will quick-flash 2 times and
then off, per 2 seconds.
(2).When battery is low but still can work, the white LED will flash 1
time and then off, per 2 seconds.