ImmersionRC | EzUHF R/C Control System
10
Cabling the TrackR2 to the EzUHF Transmitter:
To cable the TrackR2 to the EzUHF transmitter a 4-pin Mini-DIN to 4-pin Mini-DIN cable is required.
This cable will be available late November 2010 from ImmersionRC resellers. A standard S-Video cable
cannot be used due to the necessity to cross over the PPM In/out connections.
Note that both connectors are viewed from the back of the male connector, where the solder
connections are to be made.
Note that the switch on the TrackR2 must be in the ‘Normal’ position, and not ‘Low-End’ when
connecting it to the EzUHF.
