Immergas 3.030863, Инструкции и предупреждения

Страница: 37 / 48

37
9. TIME AND PROGRAM MENU.
•
Time slots.
The Zone Remote Panel allows you to set 4 calendars with
up to 4 slots. During the set time slots, the system will be
in Comfort mode.
After setting these 4 calendars it is possible to associate them
to the various days of the week.
Press the “Menu” button. Select by pressing the main
selector (
Ref. 1 Fig. 4
) the item “Time and program”, then
“Time slots”.
Once you have accessed the menu, adjust the various items
highlighted by turning the main switch. Set the value and
save it by pressing the main switch. Each time it is saved, it
moves to the next item.
After programming, press “Conferma” (Confirm).
•
Time programme.
Time slots are assigned to Zones in these menus
(Calendars from 1 to 4) to the associated Zone, both sanitary and
heating. You can assign the calendar to a single day or to
a group of days.(single day, Monday - Friday, Saturday -
Sunday, Monday - Saturday, Monday - Sunday).
Therefore each day may be personalised with 4 different
operating programs.
For convenient selection, the bottom part displays the
graphics of the relevant calendar being selected .
•
Holiday programme.
In case of need it is possible to suspend the operation of the
system for a certain period, if the device to which it is
connected has this function.
In the menu you can enter the start and end dates of the
holiday.
10 SETTINGS MENU.
By pressing the “Menu” button you can access a list of menu
items t to customize the Zone Remote Panel.
To browse the menus, which can be accessed by pressing the
relative “RH” or “LH” context buttons, scroll through the
sub-menus displayed by turning the main switch.
Press the said selector to select the one highlighted.
By pressing repeatedly, you can scroll down the menu levels
and go back to a previous level by pressing the “Indietro”
(Back) context button. To exit the menu completely, press
the “Esci” (Exit) button, which will take you back to the
initial page of normal operation.
To confirm the parameter change, press the main switch.
Note: The default values depend on the device connected
to the Zone Remote Panel, except those indicated below.
Note: Parameters not managed by the device connected to
the Zone Remote Panel are displayed with the symbol “--”.