IML NEW MP-025-M, Руководство по установке и обслуживанию

Страница: 5 / 15

20
TUBING
• The tubing connection must be done stuck to the connecting pipe that is supplied
along with the pump; joints from the connecting pipes with the suction and
impulsion nozzles are of a screw-thread type and come with sealing joints to avoid
water loss. (Fig. 2).
• Impulsion tube installation is done totally perpendicularly and is well centred with
respect to the nozzle to be connected so as to avoid external pressure being
exerted on the pump and the tube. Apart from making assembly more difficult, this
pressure could even break them. (Fig. 2)
• Suction tube installation is done at a slight angle of 2 % towards the pump, thus
avoided siphon formation. (Fig.2).
• For the pumpʼs good working, you must primed the pump pre-filter until water dips
into the suction tube.( Fig.3)