IMI Hydronic IMI PNEUMATEX Pleno PI, Руководство пользователя

Страница: 66 / 100

66
de
fr
en
nl
}
BrainCube with ComCube DCD
Up to four BrainCube controls can be operated with one or more ComCube DCD
communication modules. Besides the cabling work (
:
electrical connection pages
60 - 62), the following parameter settings are required on the BrainCube:
• Open *ComCube* menu: press
menu
and then
esc + push
at the same time.
• Make the settings on the *ComCube* menu:
ComCube
BrainCube off
Shows the selected BrainCube No.
ComCube

push
Enable BrainCube for
BrainCube 1
ComCube DCD operation
BrainCube 2
BrainCube 3
push
Select an available BrainCube No.*
BrainCube 4
Back
push
Exit the *ComCube* menu
* If a BrainCube No. is already assigned, it no longer appears in the selection list.
:
page 57 menu – Parallel operation display
:
Installation | Operation ComCube
BrainCube with ComCube DCA
The PIS pressure can be made available to the building management system in the
form of a DC-isolated 4-20 mA signal through ComCube DCA (
:
electrical connection
pages 60 - 62). Parameter settings must not be made on the BrainCube. PIS 4-20 mA
signal conversion is provided by the customer.
Pressure sensor PIS
Measurement range → Signal
Pleno PI 0–10 bar → 4-20 mA
:
Installation | Operation ComCube
Option
Option
Start-up