1
ǃ
Maintenance for the fill valve
Troubleshooting
1.The water level too high or too low
malfunction
solve way
2.Can not stop water
3.Water fill speed slow
4.Others questions
Adjust water level
Wash rubber seal and mandril
Wash filter;Adjust water stress to be higher
Please consult with a professional technician
2.Maintenance for the flush valve
malfunction
Troubleshooting
1.Can not flush water
reason
solve way
1.Leaking
The flush rod is dmaged or broken
Replace the flush rod
The working water level too low
Adjust the working water level
The rubber seal can not seal water
The movement of flush valve is blocked
Replace the rubber seal
Wash the dirt out of flush valve
ķ
Adjust the small flush water volume
by adjust the small flush adjuster.
ĸ
Wash the
G
irt of flush valve
by flowing and clean water.
Ĺ
Take out of the silica gel of flush
valve,clean or replace it.
small flush adjuster
ĺ
Take out of the sealed rubber of
flush valve.clean or replace it.
ķ
Turn the knob,adjust water level height.
Take off the filter tip and clean
Losen the nuts and clean or replace
the valve core and the silica gel of fill valve
ĸ
Flush to remove debris
valve core
silica gel
sealed rubber
Imex Ceramics UK
Unit
A
Reg’s
Way, Bardon Hill, Coalville, Leicestershire LE67 1FL
T: 01530 835598 E: [email protected] www.imexceramic.co.uk
