EN
13
1. Handle
1A. Cable hook
2.
Steam mop button
3.
Handle release button
4.
Manual steam cleaner release button
5.
Steam mop body
5A. Upper cable winder hook
5B. Lower cable winder hook
6.
Manual steam cleaner
7.
Steam Regulator On/Off Button
8.
Steam Ready Light
9.
Manual steam Cleaner Steam Button
10. Power cable
11. Technical Data (On the Manual
Steam Cleaner)
12. Water reservoir
12A.
Reservoir cap
13A. Microfibre cloth for hard surfaces
13B. Microfibre cloth for rugs
14. Steam Brush
14A. Detergent reservoir
14B. Detergent reservoir cap
14C. Detergent spray pedal
14D. Detergent spray
14E. Steam brush removal button
15. Rugs/carpets support
16A. Accessory adapter
16B. Flat accessory adapter
16C. Flat cleaning head
16D. Flat surface cleaning cloth
(only for flat cleaning head)
16E. Glass accessory
(only for flat accessory adapter)
16F.
Grout brush
16G. Stain removal brush
16H. Goose neck brush
16I. Plastic brush
16L. Metal Brush
16M. Elastic fabric cloth
(only for flat accessory adapter)
16N. Flexible hose
17. Doser for detergent
18. Accessory bag
PREPARATION
TYPE OF WATER TO BE USED
Use only one of the two types of water listed below:
• unscented demineralised water.
ASSEMBLY
• Unpack the product.
• Check that the product is intact and not damaged.
• Insert the handle (1) in the steam mop body (5) until the handle release Button clicks (3)
[Fig. B1-A].
• Remove the handle (1) by pressing the handle release button (2) and extract.
• Clip the Brush (14) onto the steam mop Body (5) until the steam brush release button clicks
(14E) [Fig. B1-B].
• Remove the brush (14) by pressing the brush removal button (14E) and remove the brush.
• Place the Microfibre Cloth for hard floors or rugs (13A or 13B) on the floor with the Velcro side
facing up, place the brush (14) on it and press down lightly, making sure the entire surface of the
brush is covered [Fig. B1-C].
• The Cloth 13A is ideal for use on hard floors and parquets.
• The Cloth 13B is ideal for use on rugs with the suitable support for rugs/carpets(15).
• Clip the manual steam cleaner (6) onto the steam mop Body (5) pushing it horizontally until the
manual cleaner release button clicks (4) [Fig. B1-D].
