Imetec L1105, Руководство по эксплуатации, Страница: 16 / 156

14
EN
Cold air shot button (3C)
If the appliance is equipped with this button, it can be used to set the
styling.
• If this button is pressed while the appliance is on, the hot air cools
down and the set style lasts longer.
• Once the button is released, the appliance returns to a hot air flow
at the selected level.
Ioniser (7) (if present)
The appliance has an ionizer featuring ION technology. This function is
automatically activated when the appliance is switched on. The LED (7)
indicates proper operation.
MAINTENANCE AND CLEANING
WARNING! Always disconnect the
appliance from the mains supply
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance!
Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle) with a
damp cloth when needed. Do not use solvents or other aggressive
or abrasive detergents. Otherwise, the surface could be damaged.
Check the intake opening of the appliance regularly and remove all
hair and dust.
Cleaning the intake filter (5)
If the appliance is provided with an intake filter, clean it as follows:
• Open the filter cap (5B) as shown in the figure.
• Wipe the front and rear of the retina (5A) and the filter cap (5B) with
a damp cloth.
• Let the parts dry well and put them back on in inverse order.
Note: the more dust is present in the place where the hair dryer is
used, the more often the filter must be cleaned.
STORAGE
When the hair dryer is not used, unplug the appliance from the socket
and store it in a dry and dust-free place.
WARNING! Once you have finished
using this appliance, make sure it
has cooled down completely before
putting it away.