17
EN
DISPOSAL
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
Pursuant to Art. 26 of Italian Legislative Decree no. 49 of 14 March 2014 "Implementation
of Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)", the
crossed bin symbol on the appliance or its packaging indicates that the product must
be disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical
and electronic equipment.
Alternatively, instead of handling the disposal, the appliance can be handed over to the
retailer when a new, equivalent appliance is purchased.
Retailers of electronic products having a sales area of at least 400 m2 can also be handed
electronic products that are to be disposed of measuring less than 25 cm, free of charge
and with no obligation to buy.
Appropriate separate collection for the subsequent procedure for the decommissioned
appliance for recycling, which includes treatment and environmentally friendly disposal
helps prevent adverse effects on the environment and health and promotes reusing and/or
recycling materials that the appliance consists of.
ASSISTANCE AND WARRANTY
The appliance is guaranteed for a period of two years from the date of delivery. Evidence
shall be taken as the date indicated on the receipt/invoice (provided it is legible), unless the
buyer can prove that the delivery occurred later.
In the event of a defect in the product which existed prior to the date of delivery, appliance
repair or replacement is guaranteed free of charge, unless one of the two solutions is
The impurities that
come out from the
steam holes stain
the garments.
Possible residue in the
steam chamber/plate.
Carry out the Self Clean procedure
(see paragraph Seal Clean/Calc-
Clean System).
Chemical additives,
scented liquids or
descaling agents are
being used
These substances damage the
product: do not add additives to the
water in the reservoir.
Starch is being used.
Always spray the starch on the
reverse side of the fabric.
Water leaks from
the plate (8).
The plate temperature is
too low due to the super-
steam button (3) being
pressed too often .
Allow slightly longer intervals between
the jets of steam.
