ACCESSORIES
your appliance is equipped with the following attachments:
• Multi-surface brush (7): the multi-surface brush (7) is suitable for all surfaces:
ceramic, marble, parquet and carpets.
• SET OF ACCESSORIES (10):
• accessory support (10a): to store the accessories and attach them to the body of
the stick.
• Dusting nozzle (10B).
• Nozzle for crevices (10c): to clean corners and slots, such as radiators, skirting
boards and blinds.
• upholstery nozzle (10d): to clean sofas, armchairs, upholstered chairs and
curtains.
USE
USING IT AS A STICK VACUUM CLEANER
Fully unwind the power cable (4). to do so, turn the upper cable hook (2a) downwards [FiG.
c1].
Using the vacuum cleaner with the cable fully or partly wound involves
an overheating hazard!
NOTE:
1. Bear in mind that a new appliance can develop odours the first few times it is
used. These odours are harmless and disappear shortly afterwards. Ventilate
the room.
2. Transparent parts can become opaque, due to use.
• Insert the plug into the socket, while holding the appliance by the handle to prevent it
from falling in the event that it was not stored in the OFF position.
• press the ON/OFF button (9) once to switch the vacuum cleaner on or off.
• switch the appliance off after use, by pressing the ON/OFF button (9) and disconnect
the plug from the socket.
• wind the cable (4) round the two hooks (2a and 2B) [Fig. D1]. with the clamp on the
plug, it is possible to secure it to the cable.
USINg IT AS A MANUAL MINI-VACUUM
• Fully unwind the power cable (4). to do so, turn the upper cable hook (2a) downwards
[Fig. c1].
• detach the mini-vacuum (8) from the body of the stick by pressing the release buttons
(5) [Fig. d1].
• attach the suitable accessory (10) for the surface requiring cleaning and connect it to
the mini-vacuum [Fig. D2].
• press the ON/OFF switch (9) once to turn the vacuum cleaner on, and start cleaning.
• When you have finished, press the ON/OFF switch (9) to turn it off and take the plug
EN
11