![Imetec D6401 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/imetec/d6401/d6401_operating-instructions-manual_2046579015.webp)
EN
13
IMPORTANT!
•
Do NOT touch and/or remove the blender stem (5), chopper lid (8) (if
present), or whisk (12) (if present) when the appliance is in operation.
•
Switch off the appliance and disconnect it from the mains power supply before
assembling or disassembling the blender stem (5), chopper lid (8) (if present),
or whisk (12) (if present). Carry out this operation at the end of each use.
•
Do NOT use the appliance when wearing loose clothing or long sleeves as
they could get caught in the blender stem (5), chopper lid (8) (if present), or
whisk (12) (if present), when the appliance is in operation.
•
Failure to comply with these instructions and improper use of the appliance
can lead to injuries.
•
Pay utmost attention when handling the blades of the blender (7) and the
chopper (9) (if present), when cleaning the blade cover of the blender (6) and
when emptying and cleaning the chopper bowl (10) (if present).
•
Remove the protection from the chopper blades (9) (if present), before using it.
SYMBOLS
Warning
Prohibited
Protection class II
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1. On/Off button (low speed)
2. On/Off button (turbo speed)
3. Motor unit
4. Plug
5. Blender stem
6. Blade cover of the blender
7. Blender blades
8. Chopper lid
9. Chopper blades
10. Chopper bowl
11. Whisk support
12. Whisk
13. Container
14. Technical data