IMET KS 450 FT, Инструкция пользователя

Страница: 10 / 53

TRADUCTION OF THE ORIGINAL USER’S INSTRUCTIONS
KS450FTeng ED.2011 rev.34 10
+ The person in charge of the operations has to make sure that all the national, local and company norms in
reference to injury prevention and work safety are observed.
+ One or more areas for material storage have to be identified.
Transport with machine at sight
This type of transport is usually chosen for deliveries by closed truck, in case of short trips. The machine is wrapped
with thermoplastic material in order to assure a suited protection of all its parts; it is then loaded on a truck and should
be wrapped with ropes that tie it up. To lift it, use a forklift from the front side of the saw, with forks 1.5 m long or more.
Warning: if machine is delivered by open trucks, please cover it !
Shipment with wooden crate or wooden case. ( ON REQUEST, COST CHARGED TO THE CUSTOMER)
The machine is wrapped with thermoplastic material in order to assure a suited protection of all its parts; then it is
packed into a wooden crate or cage to protect it from hits, inclement weather and so on.
To lift it, use a forklift from the front side of machine, with forks 1.5m long or more (see picture ).
You need to follow the indications you find on the packing before proceeding to moving or opening it.
WARNING
The size of the packing varies according to the machine and its configuration.
WARNING
The saw is fixed to the packing by means of screws, so as to hinder it from moving during the shipment (see drawing
in the following page)
9 - ACCESSORIES ASSEMBLING
The necessary information for the installation are given along with the accessories. Anyway you can find here a short
description of how they work:
Connection element RAKS450 - OPTIONAL - Required to connect in solidarity any material support roller to the
loading or unloading.machine side. Fix and regulate it by the 4 screws just supplied, on each ; also place in order the
metal sheet to avoid coolant splash at the beginning of the roller line.
Loading/Unloading Roller Tables RTS Optional : it is comprised of modular steel units, each 1.5 meter long and
equipped with 5 rollers. The loading capacity is 1500 kg. It must be fixed to the side - left and right - of the saw, to
guarantee the stability of the material that is going to be cut. To level
the height of the rollers, place a bar on the worktable and clamp it,
then adjust all the screws until the table is perfectly in line with the
saw.
To rightly install the loading roller table,
first of all it is necessary to level and to
adhere the machine.
Therefore level the loading roller table to
the same level of the work table and the
back supporting jaws by beginning to
that nearest the machine.
The alignment of the loading/unloading
tables must begin with the one closer to
the machine, taking as reference point
the worktable and the back jaw. When
cutting long bars, fix the table to the floor
and make sure the coolant, which is
carried by the bars, doesn’t drop on the
floor.