IMER MASONRY 700, Инструкция по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 3 / 13

IMER U.S.A. Inc.
MASONRY 700
3
Dear Customer,
Congratulations on your choice of purchase: this IMER saw, the result of
years of experience, is a fully reliable machine and is equipped with the
latest technical innovations.
- WORKING IN SAFETY
To work in complete safety, read the following instructions care-
fully.
This OPERATION AND MAINTENANCE manual must be kept on site
by the person in charge, e.g. the SITE FOREMAN, and must always be
available for consultation.
This manual is to be considered an integral part of the machine, and
it must be preserved for future reference (EN 12100/2) throughout the
cement may be requested from the saw manufacturer.
The manual contains important information regarding site preparation,
installation, machine use, maintenance procedures and requests for
spare parts. Nevertheless, the installer and the operator must both have
adequate experience and knowledge of the machine prior to use.
To guarantee complete safety of the operator, safe operation and long
life of equipment, follow the instructions in this manual carefully, and
observe all safety standards currently in force for the prevention of
accidents at work. Use personal protection (safety footwear, suitable
clothing, gloves, goggles, etc.).
- The use of protective goggles is compulsory.
- Ear protection must be worn at all times.
- Make sure that warning signs are always legible.
the steel structure or working parts of the machine.
IMER INTERNATIONAL declines all responsibility for non-compliance
with laws and standards governing the use of this equipment, in par-
ticular; improper use, defective power supply, lack of maintenance,
instructions contained in this manual.
IMER INTERNATIONAL is entitled to modify the characteristics of the
sawing machine and/or the contents of this manual without necessarily
updating previous machines and/or manuals.
1. TECHNICAL DATA
2.
Table 1 - TECHNICAL DATA
Model Masonry 700
Blade diameter 700 mm
Blade mounting hole 25,4 mm
Blade rpm (220V/60Hz) single-phase
Blade rpm (220V/60Hz) three-phase 1220 rpm
1710 rpm
Blade rotation direction
clockwise
Motor rating 220V/60Hz single-phase
Motor rating 220V/60Hz three-phase 4 kW
5.5kW
Cutting table dimension 490x660 mm
Overall dimensions
(width x length x height)
850x1550x1600 mm
Overall dimensions for transport
(width x length x height)
850x1550x1600 mm
Sawing machine operating weight 285 Kg
Weight for transport 202 Kg
Table 2
Feature
Motor (220V/60Hz)
three-phase
Motor (220V/60Hz)
single-phase
Power (kW) 5.5 4
Rated voltage (V) 220 220
Frequency (Hz) 60 60
Absorbed current (A) 22 23.2
rpm 1710 1220
Service type S1 S1
Insulation category F F
Protection category IP55 IP55
180
2. DESIGN STANDARDS
The MASONRY 700 sawing machine has been designed and manu-
factured in accordance with the following standards: EN 12100-1-2; EN
12418 and meets directives 89/336/EEC; 98/37/CE.
3. SOUND PRESSURE LEVEL AND VIBRATIONS
Table 3 shows the sound pressure level measured loadless at the ope-
PA
) and of the vibrations transmitted during operation.
Table 3
Model Type of motor L
pA
A
eq
Masonry 700 Electric 95 dB 2.33 m/s 2
4. CUTTING SPECIFICATIONS
This saw model has been specially designed for cutting stone, ceramics,
marble, granite, concrete and similar materials. Only water-cooled dia-
mond blades with continuous or segmented edges must be used. Under
no circumstances must dry cutting blades be used or materials other
sponsibility for damage caused by improper use of the above machine.
5. CUTTING CAPACITY (Blade diameter 700 mm)
movement of the disk).
6. WARNING
(max. 40 kg)
wheels with the brake before starting cutting operations.
case, workpieces must not overhang the worktable.
cooling water contaminated with cutting dust.
7. SAFETY PRECAUTIONS
IMER saws are designed for work on construction sites and under con-
ditions of natural light, hence the workplace must be adequately lit (min
500 lux).
- It must never be used in environments where the danger of
devices, which must be in perfect condition.
2. Never use makeshift and/or faulty power cables.
3. Make electrical connections on the construction site where they
will not be subject to damage. Never stand the saw on power sup-
ply cables.
4. Lay power cables in such a way as to prevent water penetration.
5. Repairs to electrical installations must only be carried out by
nected from the power supply and is completely immobile during
repairs and maintenance operations.
earth system with a copper plait with a minimum cross
section of 16 mm
2 . The connection point is made with
with the earth symbol.
- Stop the saw only by means of the main switch
8. ELECTRICAL SAFETY
The IMER saw meets Std. EN 60204-1, EN 61029-1 and is in particular