IMER
U.S.A. Inc.
7
MINUTEMAN
1
2
SAFETY NOTES
DO
Read all the instructions before operating the mixer.
DO
Use caution when assembling and transporting the mixer.
DO
Keep the mixer clean and free of debris and mix build-up.
DO
Keep all the moving parts lightly greased (wheel axles, swivel bracket, etc.).
DO
Periodically inspect your mixer for abnormal wear or damage.
ASSEMBLY - Follow drawings 1 thru 6 -
DO
Wear the appropiate safety gear; hard hat ,gloves, goggles, ear protection and wear
tight clothing around the mixer.Loose clothing can cause injury should it become
entangled with the mixer.
Do not start and stop the mixer with material in the drum, this will damage the motor and is
not the best way to mix.
Always have the drum rotating when filling or discharging the mixer
DO NOT
Place the main frame (# 18 Drawing 1) on a
level surface as illustrated in this diagram.
Insert and secure the draw bar (# 20 Drawing
1) into the main frame with the 3" hex head
bolt and nut, using the open wrench provided
in the assembly kit.
Slide the wheels (# 8 Drawing 1) onto the main
frame bar(# 18 Drawing 1) and anchor them
in place with the cotter pins (# 13 Drawing
1)which are included in the assembly kit
provided with each MINUTEMAN mixer.
