IMER
U.S.A. Inc.
10
MINUTEMAN
1) Use a 3 prong, grounded, 110 volt power connection for safe operation. The line should be at least 14
gauge.
2) To mix concrete, add water, concrete, and aggregate while the drum is rotating.
3) Discharge the mixed concrete by elevating the dump handle (# 10 Drawing 1) while the drum is
rotating.
NOTE: When tilting the drum to discharge the concrete, do so slowly. It is important to
perform the discharge smoothly, this keeps the machine balanced and upright.
4) The ON/OFF switch in the motor of the MINUTEMAN mixer provides thermal protection to the motor
in the event of overheating. Should your motor shut off automatically, turn off the unit and unplug it for
15 minutes. This allow the motor to cool. After the cooling period, plug in the motor and press the start
switch. If the motor does not restart and continue to run, contact your local IMER products distributor, or
call IMER direct at (415) 872-2200.
OPERATION
The MINUTEMAN Mixer requires very low maintenance.However, a few basic maintenance procedures
should be followed.
NOTE: Always unplug the mixer from its power source before any cleaning or
maintenance functions are performed.
1) Clean the mixer after each use and do not allow any concrete to build up on any portion of the mixer.
2) Change the gear-box oil approximately every 3000 hours of operation (Use SAE 40).Essentially the
gearbox is sealed for the life of the mixer.
3) Keep all moving parts lightly greased.
4) Keep the electric motor cooling fins clean and free of debris build-up.
NOTE: When spraying the mixer with water, do not direct the water onto the motor or the
ON/OFF switch assembly.
MAINTENANCE
All orders for spare parts must include the following:
1) Type of machine.
2) Part number and drawing references of each part.
3) Serial number and year of manufacture recorded on the machine's identification plate.
SPARE PARTS
