SeaLED 300 - User Manual
6
2.2
Serial commands
The SeaLED 300 is supplied with a simple light GUI for setup and control:
Fig. 1 – Light control GUI
The GUI sends commands to the light unit, there is no feedback from the unit to the GUI.
FUNC 23 = Light up
FUNC 24 = Light down
FUNC 90 = Activate analogue input
FUNC 91 = Deactivate analogue input
Serial Protocol = 9600 N 8 1 (end char = Carriage Return)
2.3
Analogue input (0 – 10V)
When analogue input is activated, the light will be off if no input voltage is applied.
3
Mechanical Installation
Installation of this product should only be performed by qualified personnel.
Do not open the Light when carrying out the installation.
Mount the Light on a secure and vibration free surface and strap the cable for stress
relief to the supporting structure.
The Light should be electrically isolated from the mounting base in order to minimize
any corrosion current between the relatively housing and surrounding metal structures.
