4
Installation
Hardware Installation
1. Connect the camera to a network switch / hub with an Ethernet cable.
2. Connect the power jack to the camera, and connect the adapter to a power outlet.
3. For the use of PoE, just connect the camera to a PoE switch with an Ethernet cable; no need to
connect the power adapter to the camera.
Assigning IP Address to the device
The iMege device discovery tool is a utility provided for searching iMege network video devices in a network.
It can also manage the IP assignment for multiple devices. This is useful when bulk network setting of the
network devices is required.
When IP camera is correctly installed in a network, it can be searched by the tool. The steps of applying this
search tool are as below.
1. Launch iMege Discovery Tool (iMegeDiscovery.exe). The tool will start searching and then displaying
the cameras on the Device List after they are found.
