10
5. Connection and commissioning
5.1.
Interface
5.2.
Power supply
The station is powered with a passive PoE. The PoE splitter is integrated in the
station. The power is conveyed from the AC/DC adapter through the DC injector
and the ETH cable (all provided in the box).
Customers may need to re-confirm that the whole system complies with the EMC
directives.
5.2.1.
Input requirement
Power supply: PoE (passive) 24V DC and 0.75A
Nominal voltage range: 11V DC to 26V DC from the supplied PoE injector
Station minimum input voltage: 10V DC
Max input current: 1A
Injector DC connector: 5.5mm x 2.1mm
Note : The station cannot be powered with IEEE 802.3x active PoE
routers/injectors.
5.2.2.
Cable length
If using another ethernet cable than the one provided, select a cable CAT5e or
above, shielded F/FTP, SF/UTP, SF/FTP.
Ethernet cable length depends on the gauge size and station consumption.
For guidance (AWG22 to AWG26):
Conditions
Output power supply
max length
All
20Vdc < V < 26Vdc
40m
Temp always > 0°C
(no heating required)
20Vdc < V < 26Vdc
60m
USB port
Ethernet port
Led
www.ime.de
19-10-20
