IME Nemo SX, Руководство пользователя

Страница: 16 / 30

1 / 15
BTicino SpA
Vale Borri 231 - 21100 Varese - Italy
Tel. +39 0244878.1 - Fax +39 024503448
Nemo SX - Multifunction state module Cat. N°: SXMC02
Contents Pages
1. Description - Use ............................................. 1
2. Range ............................................................... 1
3. Overall dimensions .......................................... 1
4. Preparation - Connection ................................. 1
5. General characteristics .................................... 6
6. System architectures ....................................... 9
6.1 Stand-alone ........................................................ 9
6.1.1 with local addressing ..................................... 9
6.1.2 with remote addressing ............................... 10
6.2 Supervised ....................................................... 11
6.2.1 with local addressing ................................... 11
6.2.2 with remote addressing ............................... 13
7. Compliance and approvals ............................ 15
1. DESCRIPTION - USE
. Module dedicated to Nemo SX System.
. Enables to display a clear indication on the status of a circuit or of
an associated modular device (MCBs, RCCBs, RCBOs...) and/or
power devices (e.g. ACBs, MCCBs...) via voltage-free SPST-NO
contacts.
. Equipped with DIP switches (on the side) allowing product
configuration of:
- type of information returned by the device:
open, closed, tripped positions of a modular or power device, etc.
LED behaviour
other configurations (see § “Module configuration”)
Symbol:
2. RANGE
. Cat. n° SXMC02: Universal State Module; 3 inputs from voltage -
free SPST-NO contact with one common terminal.
Width:
. 1 module. 17,8 mm width.
3. OVERALL DIMENSIONS
4. PREPARATION -CONNECTION
Fixing:
. On symmetric rail EN/IEC 60715 or DIN 35 rail
Operating positions:
. Vertical, Horizontal, Upside down, On the side
Power Supply:
. Mandatory in 12 VDC via the specific Power supply module Cat
n°SXAA230
. Two ways:
via specific communication patch cords (cat. nos SXAC250/
500/1000) to connect at the downstream through dedicated ports
via specific communication rails (cat. nos SXAR18/24/36) to
connect at the rear through dedicated connectors
Technical data sheet: IDP000169EN_04
Updated: 30/09/2020 Created: 31/08/2017