ITalks MCS 1608 V2
Installation manual click version
Installation manual Click version 02-04-2020 Page 3 of 3
Optional keytool:
There is an optional tool (keytool) available to remove the enclosure
from the click mount. See image 7.
Assembled devices (deep sleep):
When you order a fully assembled device, the unit is in deep sleep mode
on arrival. To wake up the device you have to use a keytool (optional) with
has a magnet inside. If you swipe the keytool a few times at the top side
of the enclosure from left to right and back, the device will wake up and
will start to make a connection.
All leds start to blink when it is done successful.
See also this video that shows the wakeup procedure:
https://www.1m2m.eu/download
Only when properly assembled and mounted this housing can withstand wet
conditions comparable to IP67.
Image 7
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • +49 9401 9333-0 • [email protected] • www.ime.de
25-05-20
