ITalks MCS 1608 V2
Installation manual click version
Installation manual Click version 02-04-2020 Page 2 of 3
Mounting instructions
The enclosure has a transparent rubber seal in the cover (see image 4, shown as white ring). To be sure the
enclosure is closed properly please follow these instructions.
1.
Make sure the transparent rubber ring is placed around the cover.
2.
If it is very difficult to close the lid you can put a bit of Teflon grease on the ring.
3.
To have the best protection against water place the enclosure vertically, with the lid pointed downwards.
Below some examples in Image 5:
4.
The click mount part has to be mounted to something, especially
the two holes near the lid should be used for mounting the
device. This way the lid will have a strong fit. The other two
optional holes can be used for extra strong mounting.
See image 6.
Image 4
Image 6
Image 5
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • +49 9401 9333-0 • [email protected] • www.ime.de
25-05-20
