IMCO Xtreme Advantage scX4, Руководство по обслуживанию

Страница: 15 / 20

LOWER GEAR CASE-DISASSEMBLY
NOTE; The following instructions assume that the lower gear case has already been
separated from the upper gear case. Brackets following the part name represent the
drawing figure # and item #.
1. Remove prop adaptor ring [6-39]
2. Bend the tabs of the bearing carrier tab washer [6-37] away from the cover nut
[6-38].
3. Remove cover nut [6-38]
4. Remove bearing carrier [6-34]
5. Remove bearing carrier thrust washer [6-28], bearing carrier shims [6-29] & bearing
carrier “O” ring [6-30].
6. Align flats on prop shaft [6-27] to clear pinion gear nut [6-8] remove prop shaft.
7. Remove pinion gear nut [6-8] & pinion gear spud washer [6-7].
8. Remove vertical shaft [6-2].
9. Rotate pinion gear to align bearing driver lugs on pinion gear to align with flats on
pinion bearing (see detail below) and remove pinion gear [6-6].
10. Remove prop gear [6-26].
Page 11
This open area must
face prop gear in order to
remove or install gear
The 3 flats on the
bearing must align
with the 3 flats on
the gear.