IMC MISTRAL 13 Series, Инструкция по установке и эксплуатации

Страница: 10 / 25

Mistral M60, M90, M135
10
CHANGING A LED LIGHT ASSEMBLY
The cabinet interior is illuminated by a LED light strip fitting located at the front
of the top inner panel.
To change the light assembly:
·
Ensure the mains power to the unit has been turned off.
·
Open the front cabinet door(s).
·
Unscrew the screws holding the LED assembly in place.
·
Carefully lower the LED assembly down and disconnect the 2 wires from the
unit.
·
The LED light assembly should now be free to fully remove from the unit.
·
To fit the replacement unit.
·
Place the new LED light assembly inside the unit, re connect the 2 wires
from the unit to the new LED light assembly.
·
Re fit the LED light assembly inside the unit by using the screws.
·
Re-connect the mains power and ensure the light illuminates by means of
the switch.
Fixing
Screws
Fixing
Screw
s
LED Light
Assembly
crews
LED Light
Assembly
ews