6
MOBILE HAND WASH UNIT
USING YOUR IMC MOBILE HAND WASH UNIT
Commissioning
Firstly; ensure that the unit is unplugged from any power source before following
the steps outlined below.
Remove the front panel by unscrewing the black knob, tilt the panel backwards
and pull away from the unit at an upward angle. This will enable the operator to
gain access to the inner components of the unit.
Once the front panel has been removed, ensure that the waste water tank is in
place and that the drain tube from the sink is correctly located within the waste
water tank. Rotate the manual fill cover and locate the flexible plastic funnel . Fill
the tank up to the level shown on the fill level indicator on the tank. Store the
funnel within the cabinet, close the filling spout cover and fit the front cover.
FRONT PANEL
MANUAL FILL
COVER
FLEXIBLE FUNNEL
WASTE WATER
TANK
A
A - FILL LEVEL INDICATOR
DRAIN VALVE
