MOBILE HAND WASH UNIT 5
Electricity Supply Connection
Position the unit at the chosen site, the electricity supply connection should be
made to a power outlet socket or isolator mounted on the wall close to the
machine. This socket or isolator must be accessible once the machine is installed.
Before connecting, check that the voltage shown on the rating is correct for the
electricity supply you have available. If the plug does not fit your sockets or a
longer lead is required, changes must be made by an approved electrician.
NOTE: The plug is fitted with a 13amp fuse.
The plug fuse cover must be refitted when changing the fuse. In the event of
losing the fuse cover the plug must NOT be used until a replacement fuse cover
has been obtained and fitted or the plug replaced.
WARNING: This machine must be earthed!
Should the supply cord become damaged then a replacement must be fitted by
an approved electrician. The IEE Codes of Practice must be observed.
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow
Earth
Blue
Neutral
Brown
Live
