IMC Networks Management Module SNMP, Руководство по эксплуатации

Страница: 10 / 24

7
the iView² CD. For information regarding the use of the iConfig utility, refer
to the iConfig utility help file.
About Serial Port Configuration
The SNMP Management Modules used with the iMediaChassis series feature
a serial port that includes a DB-9 serial connector. To connect an
iMediaChassis series to a terminal/computer, use a straight-through (pin-to-
pin) cable. If the computer/terminal’s port is not compatible with a DB-9
COM port, use the pin connection chart for reference in making a cable.)
Make sure the cable length is less than 50 feet (15.24 meters). Plug one end
of the cable into the DB-9 connector and the other into the appropriate port
on the computer/terminal.
Set the computer/terminal for VT-100 emulation. The serial port on the
computer/terminal should be set for: 38.4K baud, 8 data bits, 1 stop bit, no
parity, no flow control. The F2 key functions as a
Delete key on VT-100
emulators.
Serial Adapter Pin Connection
RJ-45 Pin # DB-9 Pin # Function
5 2 Transmit (OUT)
7 3 Receive (IN)
8 5 Ground
1-4, 6 1, 4, 6 - 9 Reserved
Main Serial/Telnet Configuration Screen
After running through an initial self-test, the screen will display the following
message: "Press
Enter for Device Configuration." Press Enter for the main
configuration screen, which includes the following displays: