IMC Networks iMediaChassis/20, Руководство по эксплуатации

Страница: 14 / 20

11
Enter the name of the new community (up to 16 characters, no spaces) and press
Enter. Then type one of the following to assign the community string's access rights:
• R = read-only access • W = read/write access • Enter = abort
Press Enter. When finished, press Enter, and type reboot for changes to take effect.
The Saved Values and Current Values should now both display the changes made
(e.g., new IP address and subnet mask).
Deleting Community Strings
To delete all community strings and start over, press U. Press Y to delete all strings or
N to abort. Then, press Enter. This function will delete ALL community strings. To
selectively delete community strings, use iConfig.
Assigning Trap Destinations
Manageable device sends traps when a certain events take place. To enter a trap
destination, press T. Enter the IP address of the destination device and press Enter.
Then, type the name of the community string (that the destination device has been
configured to accept) and press Enter. This function enables ALL of the traps. To
selectively activate and deactivate traps, use iConfig.
Removing Trap Destinations
To remove all trap destinations, press K. Press Y to remove all trap destinations.
Press N to abort. Then, press Enter.
Password Protection
Password protect the serial configuration process by pressing P from the main
configuration screen. Type the password and press Enter. Passwords are case
sensitive and should be no more than eight characters in length with no spaces. This
password will be requested whenever logging on or off. To remove password
protection, select P and instead of entering a password, press Enter.
Passwords are a way to make the management of network devices secure. If the
password(s) are lost, neither the end user nor IMC Networks can retrieve it.
Enabling/Disabling DHCP
To Enable/Disable DHCP, press D. Then type reboot for the changes to take effect.