IMC Networks iMediaChassis/20, Руководство по эксплуатации

Страница: 12 / 20

9
The iConfig utility works with the following platforms:
•
Windows 98
•
Windows NT
•
Windows 2000
•
Windows XP
The iConfig utility is available as a standalone application as well as built in to the
Windows version of iView² (Windows 98 users must use the standalone version of the
iConfig utility). Both applications are included on the iView² CD. For information
regarding the use of the iConfig utility, refer to the iConfig utility help file.
About Serial Port Configuration
The SNMP management modules used with the iMediaChassis/20 feature a serial
port that includes an IBM-compatible DB-9 serial connector. To connect an
iMediaChassis/20 to a terminal/computer, use a straight-through (pin-to-pin) cable. (If
the computer/terminal’s port is not compatible with a DB-9 COM port, use the pin
connection chart for reference in making a cable.) Make sure the cable length is less
than 50 feet (15.24 meters). Plug one end of the cable into the DB-9 connector and
the other into the appropriate port on the computer/terminal.
Set the computer/terminal for VT-100 emulation. The serial port on the
computer/terminal should be set for: 38.4K baud, 8 data bits, 1 stop bit, no parity, no
flow control. The F2 key functions as a Delete key on VT-100 emulators.
Main Configuration Screen
After running through an initial self-test, the screen will display the following message:
"Press <Enter> for Device Configuration." Press Enter for the main configuration
screen, which includes the following displays:
Saved Values
This section displays changes made during current session:
• IP Address (MUST be assigned during initial configuration)
• Subnet Mask (MUST be assigned during initial configuration)
• Default Gateway