IMC Networks iMcV-DS3/E3-LineTerm, Руководство по эксплуатации

Страница: 6 / 16

3
DIP Switch Settings
FUNCTION SWITCH SETTINGS RESULT [(D) = Default]
Loopback (iView
2
Configurable)
S1-1: OFF Loopback Disabled (D)
S1-1: ON Loopback Enabled
Loopback Type (iView
2
Configurable)
S1-2: OFF Coax (D)
S1-2: ON Fiber
Not Used
S1-3: OFF
S1-3: ON
Fault Loopback (iView
2
Configurable)
S1-4: OFF Fault loopback Disabled (D)
S1-4: ON Fault loopback Enabled
Line Build-Out
S1-5: OFF 0 to 255 ft. (D)
S1-5: ON > 255 ft.
Transmit Coax Data Source (iView
2
Configurable)
S1-6: ON 7: ON Standard Data (D)
S1-6: OFF 7: ON Unframed All Ones
S1-6: ON 7: OFF Alternating Ones & Zeros
S1-6: OFF 7: OFF Pseudorandom Bit Sequence
DS3/E3/STS-1 Selection
S1-8: ON 9: OFF 45 Mbps (DS3) (D)
S1-8: OFF 9: ON 34 Mbps (E3)
S1-8: ON 9: ON 52 Mbps (STS-1)
Remote Management
S1-10: OFF Remote Management Disabled (D)
S1-10: ON Remote Management Enabled
Features
The iMcV-DS3/E3-LineTerm module includes several features that allow it to be
configured for DS3, E3, or STS-1-based environments.
Loopback (DIP Switch S1, Position 1)
This switch enables or disables the loopback feature. When this feature is enabled,
the data line (Coax or Fiber) set by the “Loopback Type” DIP switch is looped back.
By default this feature is DISABLED .
This feature can be controlled by SNMP management software (iView
2
) when the
iMcV-DS3/E3-LineTerm module, configured as a HOST, is installed in a managed
chassis.