IMC Networks IE-iMcV-VDSL2-LANextender, Инструкции по эксплуатации

Страница: 13 / 21

10
The unit will automatically adjust to reach the best bandwidth performance for the
physical line it is connected to. The associated LED display will indicate the
Bandwidth performance the unit is running at any given time.
This is not the
bandwidth that is being transmitted but the bandwidth the line is capable of. The
Bandwidth number is based on "User Payload" and does not include the Ethernet
Frame overhead. For Band Plan 998, this LED display will indicate the MAX down
stream rate to the remote unit.
Band Plan 997 will provide the greatest symmetrical bandwidth the line can support.
The end user can also select Band Plan 998 for asymmetric operation to provide
better downstream performance. Either plan will automatically adjust for the greatest
bandwidth transport. The IE-iMcV-VDSL2-LANextender will automatically seek the
best operating condition for the physical line it is connected to.
NOTE
The RANGE is only an approximation based on a typical line in a normal noise environment.
Actual distances will very depending on the condition of the physical line in use.
When the Ethernet port is connected at 10BaseT, the VDSL2 line will be limited to
10 Mbps operation and will indicate a RANGE of 5500 feet or less for all length lines.