IMC Networks IE-iMcV-MultiWay Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 60

background image

13

Deleting Community Strings

To delete all community strings, perform the following:

Press

U

. The "Are you sure you want to delete all future strings?" prompt is displayed.

Press

Y

when prompted to proceed and delete all community strings,

N

to abort.

Press

Enter

to finish.

This function will delete ALL community strings. To selectively delete community
strings, use iView

2

(iConfig view) to configure the device.

Ending the Session

Press

E

to end a serial port or Telnet/HyperTerminal session before disconnecting the

serial cable. This will stop the continuous stream of data to the serial port.

Rebooting the Unit

To reboot the IE-iMcV-MultiWay, type

reboot

from the main screen or the command

menu.

Enabling/Disabling DHCP

To toggle DHCP on the IE-iMcV-MultiWay between enable and disable, press

D

and

then

Y.

Press the

Space Bar

once to return to the main screen without making any

changes.

DHCP Disable

(Static IP Addressing)

DHCP is disabled in the default configuration. Initially, modules are assigned a Static
default IP Address of 10.10.10.10. Changes to the Static IP Address can be added
manually through iView

2

(iConfig view) or a Console session. The changes will be

initiated following reboot of the module.

DHCP Enable

(Dynamic IP Addressing)

If a DHCP server is present on the network and DHCP is enabled, the DHCP client
will initiate a dialogue with the server during the boot up sequence. The server will
then issue an IP address to the management card. Once the new IP address is
received, the SNMP Management Module will reboot so that the new IP address will
take effect. Refer to About Serial Port Configuration for more information about
Enabling/Disabling DHCP.

When there is no DHCP server on the network, use the serial configuration to
manually set the IP addresses.

When DHCP is enabled, the IP address (default 10.10.10.10 or a previously used IP
address, or user-configured) is saved. When DHCP is disabled, the saved IP address
will be reinstated and the device will reboot.

DHCP servers give out lease times: devices renew their leases based on the
administrator-specified time. If a device cannot renew its lease, and the lease
expires, the device will be given the IP address 10.10.10.10 and will reboot.

«
...
15
16
17
18
19
...
»

Содержание IE-iMcV-MultiWay





























































Отзывы:

Нет отзывов

Похожие инструкции для IE-iMcV-MultiWay

Бренд: Patton electronics Страницы: 16

Бренд: Danfoss Страницы: 36

Бренд: Daikin Страницы: 4

VLT Micro Drive FC 51 Series

Бренд: Danfoss Страницы: 28

VLT Micro Drive FC 51 Series

Бренд: Danfoss Страницы: 73

VLT AutomationDrive FC 300

Бренд: Danfoss Страницы: 4

VLT AutomationDrive

Бренд: Danfoss Страницы: 89

Бренд: YASKAWA Страницы: 128

Бренд: matson Страницы: 11

5000W AC Power Inverter

Бренд: Wagan Страницы: 11

Бренд: Wacker Neuson Страницы: 36

Бренд: Premier Страницы: 12

HDMI Super Booster Plus

Бренд: Gefen Страницы: 10

Бренд: Trycom Technology Страницы: 20

Бренд: AV Link Страницы: 2

Бренд: Metra Electronics Страницы: 9

Бренд: Accorroni Страницы: 44

Бренд: Innova Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды