IMAYCC TXET062-1, Инструкция по эксплуатации

Страница: 2 / 12

2
INTRODUCTION
Thank you for choosing IMAYCC Air Compressor.
Follow the instructions when operating this compressor. It will allow you to fill
your PCP storage reservoirs or air cylinders easily. Please read the manual very
carefully before use. Any damage or injury resulting from misuse or incorrect
handling is the sole responsibility of the owner and/or operator.
For your own safety and the safety of others, carefully following warning
&important bellows.
Warning& Important
1. Please use in a well-ventilated area. Do not operate in an area where
liquid contaminants can be drawn into the compressor.
2. Do not operate near some places with smoke or open flame.
3. This compressor generates pressurized air; it will cause heat and noise.
Gloves & hearing protection & safety glasses should always wear
during use.
4. The compressor should only be dismantled by a competent technician;
or serious damage/injury may be caused to you or others.
5. Improper disassembly and reassembly will result in leaks, damage, and
may void your warranty.
6. Never attempt to dismantle any portion of this compressor when it is
pressurized or is hot after running.
7. This compressor is designed to produce dry compressed air only. Do
not attempt to feed other gases or pressurized air through for
compression. No other gas or gas combination can be used.
8. Do not operating temperature of 185°F / 85°C. Long time continually
running is not suggested, it will cause the temperature rising, and
then to cause parts damaged and the machine life shortened.
9. Make sure the compressor voltage meets your local power supply
10. Make sure it has already added the lubricate oil before using
11. Make sure the power cord is fine before use (No wear and tear or
heat damage)
12. Make sure do not operate air compressor with the shell removed
13. Make sure keep eyes on the compressor when it’s running, do not let
the compressor overfill
14. Avoid your body too close the compressor when it is running
15. Failure to follow instructions and heed warnings may result in
damage, serious injury.
Danger: DO NOT OVERFILL, DO NOT fill the pressure above 4500PSI/300Bar/30Mpa