Imax B6 Ultimate, Инструкция по эксплуатации

Страница: 2 / 24

Thank you for purchasing the B6 LiPro Balance Charger by iMAX.This
product is a rapid charger with a high performance microprocessor and
specialized operating software. Please read this entire operating manual
completely and attentively before using this product, as it covers a wide
range of information on operating and safety. Or please do use this product
in company with a specialist!
INTRODUCTION
Specifications
Operating voltage range:
Circuit power:
Charge current range:
Discharge current range:
Current drain for balancing Li-po:
NiCd/NiMH battery cell count:
li-ion/Polymer cell count:
Pb battery voltage:
Weight:
Dimensions:
DC11.0~18.0 Volt
AC100-240V,50/60Hz
Max. charge power 50W
Max. discharge power5W
0.1~5.0A
0.1-1.0A
300mAh/cell
1~15cell
1-6 series
2V, 20V
580g
133
87 33mm
Optimized operating software
B6 features the so-called AUTO function that set the feeding current
during the process of charging or discharging. Especially for Lithium
batteries, it can prevent the overcharging which may lead to an explosion
due to the user's fault. It can disconnect the circuit automatically and
alarm once detecting any malfunction. All the programs of this product
were controlled through two way linkage and communication, to achieve
the maximum safety and minimize the trouble. All the settings can be
configured by users!
SPECIAL FEATURES
Internal independent Lithium battery balancer
B6 employs an individual-cell-voltage balancer. It isn’t necessary to
connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, B6 can monitor and balance each cell
of the battery individually. Error message will be indicated and the
process will be ended automatically if the voltage of any single one cell is
abnormal.