iMartine Vrillo J300, Руководство пользователя

Страница: 8 / 18

Installation Installation Installation
Please put the dustbin into the water tank and put the handle
in the slot.
Press and hold the button in the middle of the tank and push it
horizontally along the rear of the robot. The module is
installed in place if you hear “click”.
9.Remove the mopping module
When the robot is finished working, press the clasp on both
sides, remove the mopping module backwards, empty the
water in water tank, and clean the mopping cloth (do not move
or turn the robot over during cleaning).
(Hanging permeate type water tank)
When the robot is finished working, press the button in the
middle of the water tank to remove the mopping module
backwards, empty the water in the water tank and clean the
mopping cloth (do not move or turn the robot over during
cleaning) .
(Electric-controlled water tank)
When the robot is finished working, press the button in the
middle of the water tank to remove the mopping module
backwards, empty the water in the water tank and clean the
mopping cloth (do not move or turn the robot over during
cleaning).
(2 in 1 electric-controlled water tank)
10. Instructions for mopping module
①
Please do not use the mopping module when it is left unused.
②
For the sake of safety, please be sure to remove the mopping
module when it is being charged or left unused.
③
Please do not mop the carpet. Set a forbidden area in APP to
prevent the machine from entering the carpet.
④
To achieve a better mopping effect, the mopping module
should be installed after the floor is swept for three times.
⑤
To add water or clean the dust cloth when the machine works,
please pause it, and take out and reassemble the mopping module
according to steps 8 and 9. Please do not move or turn over
the host so as to avoid failing in positioning and losing the map.
⑥
Mopping function of the machine is intended for wiping and is
conducive to deep cleaning. it cannot remove stubborn stain
effectively and replace labor force.
ON/OFF
Long press key for 3s, the indicator light is on and the
machine is started.
Long press key for 3s when the machine is under standby
mode, the indicator light is off and the machine shuts down.
NOTE: The machine cannot shut down when the host is being
charged.
Sweep/Pause
After the machine is started, short press key on the host or
start the machine using mobile APP.
(Press any key to pause in use)
Note:
• The cleaning robot cannot be used to remove liquids.
• If the battery level is less than 20, the machine cannot work.
Please charge it.
• The machine will return to the charging base automatically if
the battery level is less than 20% in use and will be powered off
and start cleaning automatically after the battery level reaches
80% Please clear various wires (including power line of charging
base) on the ground before use so as to avoid outage and
damage of objects or wires when wires are dragged by the robot.
Charging
Automatic mode: The robot will return to the charging
base automatically after work.
Manual mode: Under suspended state, short press key
to start recharging or when the recharging host is charged
under the control of mobile APP, The indicator light is under
breathing mode when the recharging host is charged.
Note: if the robot cannot find the charging base, it will automatically
return to the starting position. Please manually put the robot back
to the charging base for charging.
10 11