iMARC Pet tag engraving system, Руководство пользователя

Страница: 20 / 20

20
Adjusting the LCD contrast.
Resetting the tag holders
Use this procedure if a large or small shape is missing on the iMARC
screen when trying to engrave a tag.
Press any key to continue.
From the INTRODUCTION SCREEN, press F4 to go to the HOLDER
SETUP screen. Then press F1 to go to the time edit screen. While in
the TIME EDIT screen, press F4 to reset the machine. The time will
change to zero. Reset the time and date as needed and press ENTER.
Press F4 again to set up your holders. (See page 4.)
T
ROUBLE
S
HOOTING
With your iMARC on, locate
the LCD contrast wheel near
the lower left front side of the
machine. Using the tip of a
pen (Do NOT use a paper
clip!) apply light pressure to
adjust the LCD contrast wheel
inside the iMARC. Turn it left
or right until the contrast is
the way you like it.