Imaje s8 Contrast Скачать руководство пользователя страница 18

Страница: 18 / 138

A20736 B0

Use

3.1.2

Shut-down

The [Shut-down] command enables you to stop the printer at the end of production. The printer
enters a 2-minute shutdown phase during which printing is impossible. The jet is then stopped
automatically.

The following message is displayed on the screen:

IMPORTANT

Do not interrupt this shutdown phase.

REMINDER

You can use the

direct access key.

3.1.3

Jet(s) start-up

The [Jet(s) start-up] command is used to start up all the jets in the following three cases:

• printer startup with manual jet startup.

• restart jets after automatic stop due to a fault detected by the printer.

• restart jets after being stopped by the user.

3.1.4

Jet(s) stop

The [Jet(s) stop] command is used to stop the jets for maintenance (e.g. cleaning the head) without
stopping the printer.

3.1.5

Start Mode

The [Start Mode] command is used to program:

• whether jet startup is automatic or manual.

PRINTER SHUTDOWN PROCESSING

Содержание s8 Contrast











































































































































Результаты поиска

Содержание s8 Contrast

Отзывы:

Imaje s8 Contrast, Руководство пользователя, Страница: 18 / 138

Результаты поиска

Содержание s8 Contrast

Отзывы: