6
Launch BNP 3xr Element Manager
1. Open a browser session on the management workstation
.
NOTE:
When accessing the BNP 3xr for the first time, the address
of the computer being used to access the BNP 3xr must be on the
same subnet as the BNP 3xr.
2. Enter the IP address of the BNP 3xr into the browser’s address
field (Default IP address:10.1.1.1).
3. Click
Launch BNP Element Manager
.
• If necessary and when prompted, install the correct Java
JDK/JRE VERSION (5.0 or higher).
• At the
Login
dialog, select a user account and enter the
password.
Default login:
Administrator
.
Default password:
Admin
.
7
Go to Configuration > Global
•
Set global BNP parameters, then click
Apply Configuration
.
8
Go to Configuration > Ethernet Control
Port
•
Set
Ethernet Port 1
parameters, then click
Apply
Configuration.
9
Go to Configuration > GigE Ports
.
•
For each applicable GigE port: enable and set the IP address,
subnet, and gateway, then click
Apply Configuration
.
10
Go to Configuration > ASI Ports
•
For each applicable ASI port: select a data flow direction, then
click
Apply Configuration
.
11
Go to Grooming > Mapping
1. At the
Inputs
panel, right-click on a port, and select
Create
Transport Stream
from the popup menu.
2. At the
Create GigE Transport Stream
dialog, set input stream
parameters, then click
OK
.
3. At the
Outputs
panel, right-click on a port and select
Create
Transport Stream
from the popup menu.
4. At the
Create Output Transport Stream
dialog, set output
stream parameters, then click
OK
5. Create a new Output Program by using either of the following
methods:
• Right-click on a Output TS and select
Create Program
,
or
• Groom a program: drag an existing program from a specific
transport stream of the
Inputs
panel to a specific transport
stream on the
Outputs
panel.
For more details, refer to the
Selenio™ BNP Element Manager User
Guide
.
Imagine Communications, Inc.
www.ImagineCommunications.com
Copyright 2005-2016
Imagine Communications, Inc.
All Rights Reserved
250-3077-01 Rev A Quickstart Guide
BNP 3xr, printed 2/20/16
