Platinum™ VX
Installation and Operation Manual
Platinum VX Client Overview
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
Version 1.2 | Page 80
Platinum VX Client Overview
The Platinum VX Client is a web-based tool for configuration and operation of your Platinum VX router.
It provides support for configuration, status, and alarm management of the routing system.
System and Network Requirements
The following are requirements for the PC used to monitor and control a Platinum VX:
Operating System: Windows 7, Windows 8/8.1
JavaScript enabled web browser; Microsoft Internet Explorer 8.0 or higher
Silverlight version 5.0 or higher
Magellan CCS Navigator (to create a routing system)
Platinum VX Web UI
The Platinum VX Web UI is Silverlight based, so your Browser must meet the minimum requirements
specified for support of Microsoft Silverlight 5.0 or higher.
Note:
Ensure the appropriate Silverlight version is used based on the Operating System running on
the PC, be it 32-bit (x86) or 64-bit (x64). The officially supported browser is Internet Explorer 10 or
11.
Platinum VX IP Address
The Platinum VX ships with a pre-configured (ENET 1) IP Address -
192.168.100.250
. Use this IP Address
to log into the system through the Silverlight UI and then change the IP Address if required.
Supported Network Protocols
The Platinum VX supports the following network protocols for remote/network control:
HTTP
CCS Protocol (via Magellan Remote Control Panels)
Using Magellan CCS Navigator
Database functions are provided from within the Platinum VX via the built in database editor. However,
you still need Magellan CSS Navigator if you want to include your Platinum VX as part of a routing
system with other devices and for other advanced functions.
