Imagine communications Selenio 6800 SFS6803+OP+SFS+, Инструкция по установке и эксплуатации

Страница: 19 / 118

SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
5
Back
Connectors
Figure 1-2 shows the double-slot back connector used by SFS6803
+
and OP
+
SFS
+
modules.
Table 1-5 Generic 6800
+
Module Features
Feature Description
Module status
LEDs Various color and lighting combinations of these
LEDs indicate the module state. See
Monitoring
LEDs on page 73 for more information.
Mode select
rotary switch This switch selects between various control and
feedback parameters.
Navigation
toggle switch This switch navigates up and down through the
available control parameters:

Down : Moves down through the parameters

Up : Moves up through the parameters
Control LEDs Various lighting combinations of these control LEDs
(sometimes referred to as “Bank Select LEDs”)
indicate which bank is currently selected. See
Selected Bank as Indicated by Control LEDs on
page 46 for more information.
Monitoring
LEDs Each 6800
+
module has a number of LEDs assigned
to indicate varying states/functions. See Monitoring
LEDs on page 73 for a description of these LEDs.
Local/remote
control jumper

Local : This jumper setting locks out external
control panels and allows card-edge control only;
limits the functionality of remote software
applications to monitoring

Remote : This jumper setting allows remote or
local (card-edge) configuration, operation, and
monitoring of the SFS6803
+
and OP
+
SFS
+
(this is
the default setting)