SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
39
Note:
The
ADS Clean
parameter removes all audio groups from the video stream.
If an audio group already exists and you do not want to replace it, or if the audio group to
be embedded does not exist, set the
ADS Clean
parameter to
No
(Processing > Audio >
Embedding).
To embed an audio group in Append mode, set the
Audio Group 1-4 Embedding Mode
parameter to
Append
(Processing > Audio > Embedding).
For optional minimum propagation delay, set the
Video Delay Bypass
parameter to
Yes
(Processing > Video > Delay).
SFS6803
+
/OP
+
SFS
+
parameter settings (deembedding module):
Set the
Seamless Sound Enable
parameter (Processing > Audio) to
Enable
.
Set the
Audio LOV Output Mode
to
Pass
.
To set the AES output(s) to be sourced directly from the audio deembedder using the
appropriate Demux Ch source, set the
Output AES 1-8 Source Select parameter
(s) to
Demux Ch 1/2
,
Demux Ch 3/4
, etc. (Output > Audio Source Select > AES Audio).
For optional minimum propagation delay, set the
Frame Sync Bypass
parameter to
Yes
(Processing > Video > Synchronization).
/OP+SFS+ connected to /OP+SFS+
First /OP+SFS+ parameter settings (embedding module):
Set the
Seamless Sound Enable
parameter (Processing > Audio) to
Enable
.
Set the
Audio LOV Output Mode
to
Pass
.
Note:
AES outputs in this mode are not AES11 alignment compliant and are not aligned
with video.
If an audio group already exists and you want to replace it, set the
ADS Clean
parameter to
Yes
(Processing > Audio > Embedding).
Note:
The
ADS Clean
parameter removes all audio groups from the video stream.
If an audio group already exists and you do not want to replace it, or if the audio group to
be embedded does not exist set the
ADS Clean
parameter to
No
(Processing > Audio >
Embedding).
To set an audio group to be embedded in Append mode, set the
Audio Group 1-4
Embedding Mode
parameter to
Append
(Processing > Audio > Embedding).
For optional minimum propagation delay, set the
Frame Sync Bypass
parameter to
Yes
(Processing > Video > Synchronization).
Second /OP+SFS+ parameter settings (deembedding module):
Set the
Seamless Sound Enable
parameter (Processing > Audio) to
Enable
.
Set the
Audio LOV Output Mode
to
Pass
.
Содержание Selenio 6800 SFS6803+OP+SFS+
