Page
28
of
28
430-044
•
Under “Network Connections”, right-click on the Ethernet card and select properties. Clear
unnecessary network protocols:
o
Deselect all services except for Internet Protocol Version 4 (TCP/IPv4)
•
Remove any firewalls present
o
Select the “Advanced” Tab. Deselect the Firewall option (if present).
•
Click ‘Configure’ (in the General tab).
o
Set Link speed to “Auto” or “10Mbps”
o
In the ‘Advanced’ tab, select ‘Link Speed / Duplex Mode’ and set to either ‘Auto Mode’ or ‘10 Full Mode’.
o
Disable any power saving that shuts down the Ethernet card.
o
In the “Advanced” tab, select “Link Down Power Saving” and set to “Disable”.
o
In the “Power Management” tab, deselect any power saving option.
•
Repair the Ethernet connection.
o
Windows™ remembers the hardware address for each socket. To clear the Windows™ settings,
right-click on the Local Area Connection and select ‘Repair’.
Содержание 881A/L-GS
Страница 11: ...Page 11 of 28 430 044 Figure 2 5 Display ...
Страница 25: ...Page 25 of 28 430 044 APPENDIX A HOT KEYS ...
