852-GS Ultra-Miniature Imaging Sonar
Doc No: 430-048-0B
Page
30
of
34
3.6.4.
Profile => Medium Mix
Image data is displayed at half intensity along with the generated profile points.
3.6.5.
Profile => High Mix
Image data is displayed at the normal intensity along with the generated profile points.
3.6.6.
Profile => Point Size
Choose small, medium, or large profile points for ease of visual acuity.
3.6.7.
Profile => Zero Down
To enable plotting of profile data with the zero reference of the sonar transducer pointing vertically down (see
Figure 11 below) rather than pointing horizontally (Figure 9 and Figure 10 below). This allows plotting targets
in their correct orientation. Note that the GS component will not work if the sonar is mounted horizontally (as
shown in Figure 11, below):
Figure 9 Sonar Mounted
Vertically, Transducer Down
Figure 10
Sonar Mounted Vertically,
Transducer Up
Figure 11
Sonar Mounted Horizontally, Zero Down
Note: GS will not work in this orientation
3.6.8.
Profile => Profile Min Range
RealTime only
Set the minimum range (0 - 25 m) here. Useful to eliminate detecting profile points from spurious returns that
occur close to the transducer.