11
Use the correct voltage.
This monitor is designed for use with a specific voltage only. Connection to another
voltage different than specified in this user manual may cause fire, electric shock, or
equipment damage.
Power supply
AC100-240V~, 50/60Hz, 1.5~0.7A
●
Do not overload your power circuit, as this may result in fire or electric shock.
●
Do not touch any signal input, signal output or other connectors, and the patient
simultaneously.
●
External equipment intended for connection to signal input, signal output or
other connectors, shall comply with relevant IEC standard. (e.g., IEC60950 for IT
equipment and IEC60601 series for medical electrical equipment.)
In addition, all such combination - system - shall comply with the standard IEC60601-
1-1, safety requirements for medical electrical systems. Any person who connects
external equipment to signal input, signal output or other connectors has formed at
system and is therefore responsible for the system to comply with the requirements
of IEC60601-1-1. If, in doubt, contact qualified technician or your local representative.
WARNING
:
●
Do not modify this equipment without authorization of the manufacturer.
●
To avoid the risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
接地接続は必ず、電源プラグを電源につなぐ
前に行ってください。又、接地接続を外す場合は、必ず電源ぷらぐを電源から切り離
してから行ってください。
