XLED-3MPC_XLED-2MPC
USER’S MANUAL
Keep the monitor a good distance from any wall to increase
circulation of air. Increased internal temperature may result in
fire, electric shock or equipment damage.
Warning to service technician
Suitable marking provided on the equipment shall be provided in the servicing
instructions to alert a SERVICE TECHNICIAN to a possible hazard, where both of the
following conditions exist :
●
Fuse is used in the neutral of single-phase equipment either permanently connected
of provided with a non-reversible plug.
●
After operation of the fuse, parts of the equipment that remain energized might
represent a hazard during servicing.
2. USAGE WARNING
Use the enclosed power cord and connect to the standard power outlet of
your country.
Be sure to remainwithin the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
Power supply
AC100-240V~, 50/60Hz, 1.5~0.7A
Make sure to plug the power cord in until it is firmly inserted. When
disconnecting the power cord, make sure to hold the power plug
when pulling the plug from the outlet. Tugging on the cord may
damage and result in fire or electric shock.
The monitor must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
