Seite
34
von
45
Image Engineering
Return parameters
After executing the command
“LED-Panel.exe -getCurrentLED,” the device will return a two- or
three-digits value of the currently switched LED like XYY or YY. Where X is a one-digit value of
the lighted LED of the lower LED row, and YY is the two-digit value of the illuminated LED in the
10x10 LED array.
Examples
Return value
65
means that no LEDs are illuminated in the lower LED row, and the LED number
65 is illuminated in the square field. There have been 65 switching periods in total.
Return value
623
means that the LED number 6 is illuminated in the lower LED row, and the
number 23 is illuminated in the square field. There have been 623 switching periods in total.
6.2.14 Put the LED-Panel in sleep mode, wake from sleep mode
Function
setSleepMode <mode>
Description
“LED-Panel.exe -setSleepMode 1” puts the device in sleep mode.
“LED-Panel.exe -setSleepMode 0” wakes the device from sleep mode.
6.2.15
Enable / Disable the external input “Camera Trigger”
Function
setCameraTrigger <enable>
Description
With the function
“LED-Panel.exe setcamtriggeren <enable>,” it is possible to activate or
deactivate the external (wired) input “Camera Trigger.”
