Image Engineering
Seite
3
von
5
1 INTRODUCTION
Important information: Read the manual carefully before using this device.
Inappropriate utilization may cause damage to the device, to the DUT (device under test), and/or other
components of your setup.
Please keep these instructions in a safe place and pass them on to any future user.
1.1 Conformity
We, Image Engineering GmbH & Co. KG, hereby declare that the
“iQ-AF Box” corresponds to the
essential requirements of the following EC directive:
•
Electromagnetic Compatibility - 2014/30/EU
•
RoHS 2 - 2011/65/EU
•
Low Voltage - 2014/35/EU
1.2 Intended use
The iQ-AF Box is designed to illuminate a test chart at different light levels. Any test chart of the size
124.5 x 83.5 cm can be inserted into the backside of the box.
•
Only suitable for indoor use.
•
Place your system in a dry, constant tempered environment without light interference.
•
The optimal ambient temperature is 22 - 26 degrees Celsius, and the maximum ambient
temperature is 18 - 28 degrees Celsius.
1.3 General safety information
WARNING!
•
Do not
open the device without instructions from the Image Engineering support team or when
connected to the power supply.
•
Do not
reach your hands into the device's housing when connected to the power supply.
•
Do not
change the fluorescent tubes when connected to the power supply.
•
Do not
modify the device.
