Image Access WideTEK 25-600 Скачать руководство пользователя страница 60

Страница: 60 / 101

Page 60

Setup Manual

D.3.4.3 Link Events

Use the function

Link Events

to change the sounds linked to system events.

Picture 39: Link Events list

The list of links contains thirteen events.

The sound file that is listed at each event is dependent on the language set for the
scanner .

To identify the language of the sound file, an identifier can be added to the file name. For
example “en” marks sound files in English language or “de” marks sound files in German
language.

Independent from the language selected for the scanner, every sound file can be linked to
every event.

Click on the selection arrow beside the sound file name. A list with all available sound files
opens.

Select the desired sound file from the list.

Click on the loudspeaker symbol to play the sound.

Содержание WideTEK 25-600






































































































Результаты поиска

Содержание WideTEK 25-600

Отзывы:

Бренды по названию

Популярные бренды

Image Access WideTEK 25-600, Руководство по установке

Результаты поиска

Содержание WideTEK 25-600

Отзывы:

Бренды по названию

Популярные бренды