Page
1
of
8
Guardsman Alarm System
–
Installation Instructions
The Guardsman Garage Alarm System Installation Instructions
Thank You for choosing Image4 Security!
Thank you for purchasing from Image4 Security. We pride ourselves on our customer service so if
you have any issues or questions, please call us on
01384 442 646
or email at
The Guardsman Alarm System:
Installation onto Guardsman:
1.
Position the Guardsman alarm system template transfer underneath the locking hole
so that the half crescent cups the tube locking hole. Ensure the transfer is central to
the box upright.
2.
Centre punch the two marked drill holes on the template transfer.
3.
Using the ø3.8mm drill bit provided drill through the two centre pop marks.
4.
Remove transfer and clean the locking post.
5.
Remove the alarm hub cover plate
–
M4 dome head screws. Top and bottom.
6.
Using the two self-tapping screws, press firmly and screw into the two pilot holes to
attach the alarm hub base plate to the upright. Ensure the vibration sensor Is closest
to the locking post.
7.
Remove the hub cover using the supplied star Allen key in order to set up and
program the hub (more instructions below).
8.
Insert SIM card by sliding the holder right to unlock. (SIM holder above batteries,
below keypad) Follow written instructions attached to register SIM.
9.
Insert 3 batteries into the hub. If inserted correctly, you will hear a beep and a blue
light will illuminate.
10.
Follow written instructions below to program the hub using the learn button and
keypad.
11.
Re-attach the hub cover using the supplied star Allen key.
Scan this QR code with your smartphone
to watch the installation video.
